A handcrafted helmet shell starts with a base material, commonly fibreglass or a composite blend, layered and shaped by hand rather than produced purely by mould and machine. Each layer adds strength, and the shaping stage is where a lot of the time in production actually goes.

A helmet is the most visible piece of riding gear, but it works as part of a wider kit rather than on its own. Gloves protect hands in a low speed drop, which is one of the most common types of fall, and a good pair balances grip and feel with real abrasion resistance.

Most manufacturers recommend replacing a motorcycle helmet every five to seven years even without a crash, since the internal materials that absorb impact degrade slowly with heat, sweat and UV exposure. The shell can look fine while the protective layer underneath has already lost some of its effectiveness.

This kind of workshop sits closer to a design studio than a factory. Colourways, trims and finishes are developed the way a small run of any crafted object would be, with samples, adjustments and a final sign off before anything reaches a rider.

To see the handcrafted shells behind our range, visit custom motorcycle helmets.

A clean visor is a safety item as much as a comfort one, since scratches and haze scatter light and make it harder to judge distance in low sun or at night. Clean a visor with lukewarm water and a soft cloth, and avoid dry wiping, which is what causes most fine scratches in the first place.

The liner deserves the same care. A removable, washable liner keeps the inside fresh, and following the maker's washing instructions protects both the padding and the stitching around it.

From there, the build follows the same certified construction as the standard range. Made to order does not mean a shortcut around testing, it means the standard process is carried out around one person's measurements and preferences instead of a general size run.

A handcrafted helmet shell starts with a base material, commonly fibreglass or a composite blend, layered and shaped by hand rather than produced purely by mould and machine. Each layer adds strength, and the shaping stage is where a lot of the time in production actually goes.

Neither format is a universal answer. Weather, private-air-mag.com speed, journey length and personal comfort all play a part, and many riders end up owning one of each for different trips.

To compare our full face and open face ranges side by side, see made to order helmet.

ECE 22.06 is the current European standard that motorcycle helmets are tested against, and it replaced the older ECE 22.05 standard with a wider and more demanding set of tests. Helmets are checked for impact absorption at multiple points on the shell, not just the crown, and the standard also tests rotational forces, which earlier standards largely ignored.

A helmet that is the right size should feel snug all the way round with no single pressure point, and it should not shift when you turn your head firmly from side to side. A helmet that moves independently of your head on a shake test is not the right fit, regardless of what the size label says.

Getting helmet sizing right starts with a proper head measurement, taken with a soft tape around the largest part of the head, just above the eyebrows and Hedon London ears. That figure points to a starting size, but it is only a starting point, since head shape varies as much as head size.

To browse current models when it is time to replace yours, see made to order helmet.

A handcrafted helmet shell starts with a base material, commonly fibreglass or a composite blend, layered and shaped by hand rather than produced purely by mould and machine. Each layer adds strength, and the shaping stage is where a lot of the time in production actually goes.

To see gloves and accessories that pair with our helmets, visit helmet care guide.

To find out more about the made to order process, visit luxury motorcycle helmets.